Some gadgets often add a lot of fun to life.
The same goes for cigar accessories.
Handy accessories can enhance the pleasure of your cigar experience,
add to the atmosphere, and are also a good asset to show off occasionally.
Cigar hydration pack/humidification liquid
[Name] Boveda Humidipak69 Cigar Hydration Pack
[Origin] United States
[Weight] 63g
[Time limit] 2-3 months
[Function] Provides humidity for cigars more accurately and conveniently. It will automatically humidify when the humidity is less than 69 degrees; it will automatically dehumidify when the humidity exceeds 69 degrees.
[How to use] Open the outer plastic packaging and put it directly into the cigar storage container (cigar box). Be sure not to tear the paper packaging.
Cigar moisturizing fluid is 50% propylene glycol + 50% distilled water. It is a moisturizing fluid for cigar aging and maintenance. It helps the relative humidity in the space to stabilize at around 70%, and can also prevent mold and reduce bacteria. Promote fermentation and maturity, increase the mellow taste and add a stronger aroma.
Remember not to overdose or use too frequently. This is usually required when the humidifier is first used and when there is a sudden drop in humidity. Normally, you can add one every 3-6 months (depending on the external temperature) (normal evaporation takes this much time). Frequent use will affect the water absorption and moisturizing functions of the humidor.
[Name] XiKar Cigar Moisturizer
[Capacity] 236ml
[Instructions for use] Fill the humidifier directly, let the humidifier be full, do not overflow, let it sit for 30 minutes, and then put it in the humidor/cigar cabinet.
Cigar humidor/humidifier
Four things you need to know about your cigar humidor:
01 Store cigars correctly
Before storing cigars in your humidor, you should first remove the cellophane or aluminum tube packaging from the cigars. Being wrapped in this packaging will prevent the cigars from breathing properly and hinder maturation. Although cellophane wrappers or aluminum tubes will prevent them from being flavored or tainted, they will make the cigars moister. For aluminum tube cigars, at least the lid of the aluminum tube must be opened to allow the cigars inside to fully mature.
02Limit the frequency of opening your humidor
If you want to maintain a stable level of humidity inside your humidor. If you open your humidor too often, too much water will escape from the humidor. Only open the humidor when you need the cigars, and close the humidor when you have the cigars quickly and clearly. Of course, it is not good if you do not open the cigar humidor box for a long time. Although the unique breathability of cedar wood allows you to breathe outside air, it still cannot resist the pleasure of opening the lid.
03Re-adjust as needed
Normal humidity levels for a cigar humidor should be between 65% and 75%. You can check the hygrometer again to make sure it is reading the correct humidity. If the humidity inside the humidor drops, you must repeat the humidity adjustment process. Re-wet the humidifier the same way you originally prepared the humidifier. When repeating this process, be sure to use distilled water. Although this is done a second time, it is just as important as the first time. Using tap water may harm the humidor.
04Store the cigar humidor in a safe place
Cigar humidors should be stored away from sunlight. You should also keep your humidor away from areas that generate heat or air conditioning vents, as well as from indoor lighting systems. Drawers are a great place to store your humidor. If you have children or animals, keep the humidor away from them. In addition, be sure to note that the temperature inside the cigar humidifier is a physical temperature. You cannot control the desired problem at any time like an air conditioner. All you can do is store it in a cool place based on the detected temperature.
cigar ashtray
A cigar ashtray that meets all your needs
More than just a device for holding cigars
More powerful functions and practicality
A must-have item for every cigar smoker
cigar scissors
1】How to use double-edged cigar cutters
Double-edged cigar cutters have requirements for the size of the cigar. If the size is too large, it may be inconvenient to use. It has double blades, so it is smoother to use.
The key to cutting is to do it in one step. It's better to cut into two pieces at once rather than cutting slowly. Choose sharp cigar cutters. Cigar cutters are like kitchen knives, the sharper they are, the more powerful they are, so it is absolutely right to choose sharp cigar cutters.
2】How to use drilled cigar cutters
Drilled cigar cutters are usually compact, usually in the shape of a pocket watch or a small keychain. They are beautiful in appearance and easy to carry. Drilled cigar cutters are more suitable for beginners because the opening of this cigar cutter is relatively small, which is suitable for beginners who do not have such large inhalation requirements. There will also be no chance of unsuccessful cutting, causing the outer wrapping layer of the cigar to be damaged or spread out.
If possible, please choose a cigar cutter of appropriate size and drill the blade into the cap. After drilling into the cap, rotate the blade firmly to drill a small hole in the cap, then pull out the blade and bring out the cutting part.
【4】How to use handle cigar cutters
The handle type cigar cutter has a wide range of uses and is the easiest cigar cutting tool for us to imagine how to use. It looks similar to the scissors we often use. Its advantage is that it can cut cigars of any size. However, due to its relatively large size, it is suitable for keeping at home or in the office, but is not suitable for carrying around. If you are a beginner of cigars, it is easy to scratch the cigar or cut off the entire head, which will affect the quality of the cigar.
Instructions for use: Cut the cigar at a 90-degree angle with the handle cigar cutter. If you want a smaller inhalation volume, you can make the cut smaller. On the contrary, if you want a larger inhalation volume, you can cut the cut larger.
cigar lighter
1. How to use lighters
Why do lighters often fail to fill with gas?
When inflating lighters, smokers often encounter the problem of not being able to fill the air. This is usually because you have not vented the gas inside.
Why do you need to vent it? Because every time you use a lighter, air may enter the lighter's gas tank, causing the air pressure inside to increase. It is not easy to inject lighter gas when inflating.
How to bleed the gas before use? Many smokers will choose to bleed the gas by pressing the ignition device. This is not good and can easily cause residual gas. The correct method is to press the filling hole of the lighter with a sharp object to drain the air, and then fill it with air. Align the inflatable cylinder with the air valve of the lighter and press it repeatedly for about five times, each time for about half a second.
2. The lighter cannot light up
The cause of the blockage is improper use of the lighter. First, as mentioned above, the air is not released before filling, resulting in air stagnation holes. Secondly, do not use it immediately after filling it. Wait for about 1-2 minutes before using the lighter. After the gas is injected, it must be evenly distributed in the lighter gas tank. If used directly, it may spark over and the flame may also become unstable. Let the ethane attached to the surface of the lighter evaporate. Furthermore, if it is used improperly for a long time and becomes clogged, it will not start in a month or two.
Another possibility is that the sealing ring inside the lighter cylinder is damaged. After being used for a long time, the sealing ring inside the air chamber will be corroded by the gas, causing the fire to fail. Just replace the sealing ring.
Finally, during long-term use, the fire valve of the lighter may be blocked by dust or other small impurities. At this time, use a small brush to remove the debris on the fire valve, blow lightly with your mouth, and then re-ignite.